Stands Unique

Transition Wall Supports

A stylish alternative to using a traditional floor mounted support. By supporting equipment off the floor, a major source of vibration from speakers and people moving about, this concept offers immediate sonic benefits as well as tidying up the floorspace in your room. Construction is based on a very substantial 6mm thick solid steel chassis designed for use on a solid wall with 25mm solid steel arms welded directly to the chassis. 10mm safety toughened glass is used as a platform (hwd 10 x 600 x 420). A unique cantilever design is used to ensure that the glass shelf is kept secure being bolted through twice for total safety all glass is toughened to the top British standard of 6206A.

Spike levelling system is built in, the solid kiln-dried ash hardwood cover is available in all five finishes: natural ash, natural cherry, walnut, mahogany and black ash matching Stands Unique's other product ranges. 5 x hardened shield anchor bolt fixings are supplied, note: these are designed for a secure fixing in a solid (brick, stone or composite block) wall and are one of the strongest mechanical fixing methods available giving excellent energy transference from the glass shelf via the carbon fibre links into the 6mm steel chassis and then into the wall. There is a large laser cut cable management hole in the rear of the TWS chassis for easy routing of cables behind the chassis if they are intended to be buried into the walls.

We recommend the use of extra energy management products such as the Carbon Fibre Isolators under the chassis of equipment intended to be placed on the TWS. These wall supports can be used as home cinema projector shelves they look good from below as well as from above.

If walls are 'dry lined' longer bolts can be used with spacers to attach to the shield anchor fixings into the solid wall behind - this is essential for safe installation. Enable pop-ups on your web browser to get extra close up pictures and information.

Transition wall support

The Transition wall support uses a pair of height adjustable M8 spikes and M6 threaded adjusters to perfectly level the shelf once mounted on the wall. Carbon Fibre interfaces are built into the shelf interface to aid with filtering away damaging energy. Loading is a substantial 35kgs even load. The unique cantilever design ensures that the more the 10mm thick glass platform is loaded the better the contact between the spike interfaces thus enhancing the sonic performance. Click on the picture for more detail enable pop-ups in your browser.

Wall Support Backlight system

This back light system fits inside the steel chassis. ‘The Backlight’ uses a 1watt Light Emmiting Diode (12 x L.E.D) strip light and has a power supply with extra capacity for up to 6 watts, if more than one wall support is used they may be accommodated by simply adding more light units to the '4-way hub'. The Backlight provides a focus to your equipment and makes an attractive feature of your support and equipment in your home. Choose from either white or blue LED striplights. Click on the picture for more detail.

Cable management housing system

The easy way to hide those cables without having to dig trenches and attempt messy plastering.

The cable management housing consists of a 1.2 metre long box channel with removable lid. Made from extruded Upvc, with a triple compartment, the colour is light grey to match the steel chassis of the TWS. The surface can also be painted (recommended to be keyed with wire wool first) or covered to match exisitng decor. Overall size is (hwd) 1200 x 75 x 25mm and is easily cut into sections using a wood or hacksaw.
Click on the picture for more detail.

 

 

Gallery & accessories for Transition wall supports